Clean & Cal pH Mount (US-style AC Plug)

OBSOLETE ITEM

Product #: 100744

OBSOLETE ITEM

This item is no longer available.

Seamless, rapid in situ calibration at your fingertips!

Flow thru cleaning and calibration assembly for pH and ORP process probes!
You can clean and calibrate your Hach pH and ORP process probes without having to remove them from the stream of water, or manually transport the cleaning tools and solutions.
Permanently mount our unit on a wall or board adjacent to the current location of your probe, divert water from the stream to the ‘Clean and Cal’ unit via tubing, then mount the probe in the unit. If you clean and calibrate once a week, you only need to the fill containers above the unit with a weak acid (citric or vinegar), buffer solutions and distilled rinse water, once every six months. Easily clean and calibrate via toggle switches.

The mount's transparent (and robust) acrylic body and embedded LED light allow for you to rapidly assess the condition of your probe (i.e. adequate immersion and detecting biofouling or scaling that might degrade sensor performance). The integrated manual toggles and cleaning and calibration solutions accelerates the maintenance workflows.

It works for source water pH measurements (pre-coagulation), post-coagulation settled water, post-disinfection finished water in Drinking Water applications. Within industrial applications, it is best used in source water, ‘produced’ water (in oil and gas applications), and general cooling water applications.

The Clean and Cal mount system is designed for process probes like the pHD Online Process pH Sensor (e.g. Part #: PD1P1 or DPD1P1) or Online Process ORP Sensor (Part # RD1P5). For a complete list of compatible probes, see the Clean and Cal datasheet below. Contains with these stickers for solutions containers: DI, Acid, pH 4, pH 7, and pH 10. Panel backing (Part No. 100763) and Cleaning and Calibration solutions sold separately.