Dual Parameter Monitoring Panel with SC4500, CL17sc and digital pH Sensor

Dual Parameter Monitoring Panel with SC4500, CL17sc and digital pH Sensor
Product #: DPMP-CLPHD
Unit Price Contact Hach
Ships within 3-5 weeks

Quality from start to finish​

Our panel configurations allow you to maximize the inherent quality of the instruments, providing peace of mind while leveraging Hach’s 100 years of water quality innovations.

Up and running in no time

Our preassembled, ready-to-use solutions streamline the process between purchasing and startup.

Ease of installation

When you buy a water quality monitoring station from Hach, you’ll receive an expertly designed, preassembled panel that makes installation straightforward and user friendly.

What's included?

SC4500 Controller, Claros-enabled, 5x mA Output, 2 digital Sensors, 100-240 VAC, US plug (LXV525.99EA1551)
CL17sc Colorimetric Chlorine Analyser with Pressure Regulator Installation Kit, without Reagents (8572400)
Digital pH Sensor, PPS, Water Distribution Monitoring Panel Mounting (DPD1R1-WDMP)
User manual

Specifications

Accuracy: ± 5% or ± 0.04 mg/L (whichever is greater) from 0 - 5 mg/L Cl₂
± 10% from 5 - 10 mg/L Cl₂
Air purge: Optional with 3/8-inch quick-connect fitting and tubing; 0.003 m3/min at 1.38 bar maximum
Alerts: Low and high chlorine. Dirty cell. Low and high sample flow.
Certifications: CE compliant with: EN 61326-1, CISPR 11, EN 50581
ACMA RCM
South Korea KC Certificate
North America: FCC Supplier’s Declaration of Conformance, IEC/EN 60529, ICES-003
Controller: SC4500
Controller Compatibility: SC200, SC1000, SC4500. All controllers sold separately
Cycle Time: 2.5 minutes
Dimensions : 32" x 35" x 11.5” (WxHxD)
Dimensions (H x W x D): 342 mm x 329 mm x 177 mm
Drain: ½-inch ID flexible hose
Enclosure Rating: IP66
Inlet: ¼-inch OD polyethylene tube, quick-disconnect fitting
Inlet Pressure: 0.3 - 5.2 bar supplied to Y-strainer
0.1 - 0.3 bar supplied to analyser
Installation Kit: Pressure Regulator Installation Kit
Interferences: Other oxidising agents such as bromide, chlorine dioxide, permanganate, and ozone will cause a positive interference. Hardness must not exceed 1,000 mg/L CaCO₃.
Light source: LED, measurement at 510 nm, 1 cm light pathlength
Lower Limit of Detection (LOD): 0.03 mg/L
Mounting: Wall or rack
Operating Humidity: 0 - 90% relative humidity, non-condensing
Operating Temperature Range: 5 - 40 °C
Panel: Yes
Parameter: Chlorine, pH
Power requirements (Voltage): 100-240 VAC ±10%, 50/60 Hz; 1 A
Process Connection: Sample Inlet ¼" OD tubing
Sample Drain ¾" ID tubing
Range: 0 - 10 mg/L free or total residual chlorine
  CL17sc 0 -10 mg/L Cl₂
pHD -2.0 - 14.0 pH
Reagent Consumption: 0.5 L of buffer solution and 0.5 L of indicator solution in 31 days
Sample Flow Rate: 100 - 1000 mL/min; optimal flow rate: 200 - 500 mL/min
Sample Pressure: 0.3 - 5.2 bar (4.5 - 75 psi)
Sample Requirements: Y-strainer filtration with 40-mesh screen or higher
Sample Temperature: 5 - 40 °C (41 - 104 °F)
Sensors: CL17sc
pHD
Solution Type: Drinking water, raw and treated
Weight: 40 lbs
What's included?: SC4500 Controller, Claros-enabled, 5x mA Output, 2 digital Sensors, 100-240 VAC, US plug (LXV525.99EA1551)
CL17sc Colorimetric Chlorine Analyser with Pressure Regulator Installation Kit, without Reagents (8572400)
Digital pH Sensor, PPS, Water Distribution Monitoring Panel Mounting (DPD1R1-WDMP)
User manual