Dual Parameter Monitoring Panel with SC4500, CL17sc and TU5300sc

Dual Parameter Monitoring Panel with SC4500, CL17sc and TU5300sc
Product #: DPMP-CLTU
Unit Price Contact Hach
Ships within 3-5 weeks

Quality from start to finish​

Our panel configurations allow you to maximize the inherent quality of the instruments, providing peace of mind while leveraging Hach’s 100 years of water quality innovations.

Up and running in no time

Our preassembled, ready-to-use solutions streamline the process between purchasing and startup.

Ease of installation

When you buy a water quality monitoring station from Hach, you’ll receive an expertly designed, preassembled panel that makes installation straightforward and user friendly.

What's included?

SC4500 Controller, Claros-enabled, 5x mA Output, 2 digital Sensors, 100-240 VAC, US plug (LXV525.99EA1551)
Flow Sensor for TU5300sc and TU5400sc Laser Turbidimeter (LQV160.99.00002)
CL17sc Colorimetric Chlorine Analyser with Pressure Regulator Installation Kit, without Reagents (8572400)
User manual

Specifications

Accuracy: ± 5% or ± 0.04 mg/L (whichever is greater) from 0 - 5 mg/L Cl₂
± 10% from 5 - 10 mg/L Cl₂
Air purge: Optional with 3/8-inch quick-connect fitting and tubing; 0.003 m3/min at 1.38 bar maximum
Alerts: Low and high chlorine. Dirty cell. Low and high sample flow.
Certifications: SC4500 Controller is CE compliant and is TÜV listed to UL and CSA safety standards
Controller: SC4500
Controller Compatibility: SC200, SC1000, SC4500. All controllers sold separately
Cycle Time: 2.5 minutes
Dimensions : 13" x 28" x 8.6 "(WxHxD)
Dimensions (H x W x D): 711 mm x 330 mm x 218 mm
Drain: ½-inch ID flexible hose
Enclosure Rating: IP66
Inlet: ¼-inch OD polyethylene tube, quick-disconnect fitting
Inlet Pressure: 0.3 - 5.2 bar supplied to Y-strainer
0.1 - 0.3 bar supplied to analyser
Installation Kit: Pressure Regulator Installation Kit
Interferences: Other oxidising agents such as bromide, chlorine dioxide, permanganate, and ozone will cause a positive interference. Hardness must not exceed 1,000 mg/L CaCO₃.
Light source: LED, measurement at 510 nm, 1 cm light pathlength
Lower Limit of Detection (LOD): 0.03 mg/L
Mounting: Wall or rack
Operating Humidity: 0 - 90% relative humidity, non-condensing
Operating Temperature Range: 5 - 40 °C
Panel: Yes
Parameter: Chlorine, Turbidity
Power requirements (Voltage): 100 - 240 VAC ±10%, 50/60 Hz; 1 A
Process Connection: Sample Inlet ¼" OD tubing
Sample Drain ¾" ID hose barb
Range: 0 - 10 mg/L free or total residual chlorine
  CL17sc 0 - 10 mg/L Cl₂
TU5300 0 - 700 NTU / FNU / TE/F / FTU
Reagent Consumption: 0.5 L of buffer solution and 0.5 L of indicator solution in 31 days
Sample Flow Rate: 200 - 1000 mL/min
Sample Pressure: 31 - 517 kPa (4.5 - 75 psi)
Sample Requirements: Y-strainer filtration with 40-mesh screen or higher
Sample Temperature: 5 - 40 °C (41 - 104 °F)
Sensors: CL17sc
TU5300sc
Solution Type: Drinking water, raw and treated
Weight: 22.5 kg
What's included?: SC4500 Controller, Claros-enabled, 5x mA Output, 2 digital Sensors, 100-240 VAC, US plug (LXV525.99EA1551)
Flow Sensor for TU5300sc and TU5400sc Laser Turbidimeter (LQV160.99.00002)
CL17sc Colorimetric Chlorine Analyser with Pressure Regulator Installation Kit, without Reagents (8572400)
User manual