Single Parameter Monitoring Panel with SC4500 and Ultra Low Range CL17sc

Single Parameter Monitoring Panel with SC4500 and Ultra Low Range CL17sc
Product #: SPMP-ULRCL
Unit Price Contact Hach
Ships within 3-5 weeks

Quality from start to finish​

Our panel configurations allow you to maximize the inherent quality of the instruments, providing peace of mind while leveraging Hach’s 100 years of water quality innovations.

Ease of installation

When you buy a water quality monitoring station from Hach, you’ll receive an expertly designed, preassembled panel that makes installation straightforward and user friendly.

Up and running in no time

Our preassembled, ready-to-use solutions streamline the process between purchasing and startup.

What's included?

Ultra Low Range CL17sc Colorimetric Chlorine Analyser with Pressure Regulator Installation Kit (9790300)
SC4500 Controller, Claros-enabled, 5x mA Output, 2 digital Sensors, 100-240 VAC, US plug (LXV525.99EA1551)

Specifications

Accuracy: ± 5% or ± 0.04 mg/L (whichever is greater) from 0 - 5 mg/L Cl₂
± 10% from 5 - 10 mg/L Cl₂
Air purge: Optional with 3/8-inch quick-connect fitting and tubing; 0.003 m3/min at 1.38 bar maximum
Alerts: Low and high chlorine. Dirty cell. Low and high sample flow.
Certifications: CE compliant with: EN 61326-1, CISPR 11, EN 50581
ACMA RCM
South Korea KC Certificate
North America: FCC Supplier’s Declaration of Conformance, IEC/EN 60529, ICES-003
Controller Compatibility: SC200, SC1000, SC4500. All controllers sold separately
Cycle Time: 2.5 minutes
Dimensions (H x W x D): 342 mm x 329 mm x 177 mm
Drain: ½-inch ID flexible hose
Enclosure Rating: IP66
Inlet: ¼-inch OD polyethylene tube, quick-disconnect fitting
Inlet Pressure: 0.3 - 5.2 bar supplied to Y-strainer
0.1 - 0.3 bar supplied to analyser
Interferences: Other oxidising agents such as bromide, chlorine dioxide, permanganate, and ozone will cause a positive interference. Hardness must not exceed 1,000 mg/L CaCO₃.
Light source: LED, measurement at 510 nm, 1 cm light pathlength
Lower Limit of Detection (LOD): 0.03 mg/L
Mounting: Wall mount
Operating Humidity: 0 - 90% relative humidity, non-condensing
Operating Temperature Range: 5 - 40 °C
Parameter: Chlorine, free; Chlorine, total residual
Power requirements (Voltage): 12 VDC, 400 mA maximum (supplied by the controller)
Range: 0 - 10 mg/L free or total residual chlorine
Reagent Consumption: 0.5 L of buffer solution and 0.5 L of indicator solution in 31 days
Sample Flow Rate: 60 - 200 mL/min through the instrument
Sample Requirements: Y-strainer filtration with 40-mesh screen or higher
Sample Temperature: 5 - 40 °C
Weight: 4.1 kg
What's included?: Ultra Low Range CL17sc Colorimetric Chlorine Analyser with Pressure Regulator Installation Kit (9790300)
SC4500 Controller, Claros-enabled, 5x mA Output, 2 digital Sensors, 100-240 VAC, US plug (LXV525.99EA1551)