SC4200c Controller, mA out, 2 digital Sensors, w/o plug

SC4200c Controller, mA out, 2 digital Sensors, w/o plug
Product #: LXV524.99.00120
CAD Price: Contact Hach
Call for ship date

Data Access from Anywhere

Get easy access to crucial information, helping you manage your process and be proactive in your maintenance.
Anytime. Anywhere.

Always at a Glance: Measurement and Sensor Health

Be confident of your sensor health and measurement results with easy to understand colour-coded LEDs and remote diagnostics providing you with actionable information including errors and warnings.

Fast and Intuitive Operation

Intuitive menu options allow you to calibrate your instruments quickly – helping you to easily set up your systems and optimise your processes. Using any internet-enabled device, this can be done from wherever you are.

Specifications

Altitude: 2000 m maximum
Analog Output Functional Mode: Linear, PID
Analog Outputs: Five 4–20 mA analog outputs on each analog output module
Cellular: no communication
Communication (optional): None
Communication Capabilities: None
Compatible Instruments: Ammonium: Amtax sc, AN-ISE sc, A-ISE sc
Nitrate: Nitratax sc, N-ISE sc
Phosphate: Phosphax sc
Organics: UVAS sc
pH: pHD sc
Conductivity: 3798-S sc
Dissolved Oxygen: LDO 2 sc
Suspended Solids: Solitax sc
Sludge Level: Sonatax sc
Compatible network technologies: GSM 3G/4G (e.g. AT&T, T-Mobile, Rogers, Vodafone etc.)
CDMA (e.g. Verizon)
Compliance Certifications: CE approved (with all sensor types). Listed for use in general locations to UL and CSA safety standards by ETL (with all sensor types).
Certain AC mains powered models are listed for use in general safety locations to UL and CSA safety standards by Underwriters Laboratories (with all sensor types).
Conduit Openings: ½" NPT conduit
Description : Microprocessor-controlled and menu-driven controller that operates the sensor.
Dimensions : ½ DIN - 144 x 144 x 192 mm (5.7 x 5.7 x 7.6 in.)
Display: None
Enclosure Rating: NEMA 4X/IP66 metal enclosure with a corrosion-resistant finish
Installation category: Category II
Manual Languages: Danish, Dutch, English, French, German, Italian, Spanish
Material Enclosures: Polycarbonate, aluminum (powder coated), stainless steel
Measurements: Two device digital SC connectors
Mounting: Wall, Pole, or Panel Mounting
Network connectivity: LAN version: Two Ethernet connectors (10/100 Mbps), switch function, M12 female D-coding connector.
Cellular version: SIM card holder (3G/4G).

The type of connection is dependent on controller configuration.
Operating Temperature Range: LAN version: -20 - 60 °C
Cellular version: -20 - 55 °C
Output: 5x mA Output
Pollution Degree: 2
Power Cord: 100 - 240 VAC without power cord
Power Requirements (Hz): 50/60 Hz
Power requirements (Voltage): 100 - 240 VAC
Protection Class: I, connected to protective earth
Relay: Operational Mode: Primary or secondary measurement, calculated value (dual channel only) or timer
Relays: High voltage:
Two relays (SPDT)
Maximum switching voltage: 250 VAC
Maximum switching current: 5 A (resistive only load)
Maximum switching power: 1250 VA, 125 W (resistive only load)
Wire gauge: 0.75 to 2.5 mm2 (18 to 12 AWG)

Low voltage:
Four relays on each low voltage relay module
Sensor: 2 x Digital Sensors
Sensor Input #1: Digital
Sensor Input #2: Digital
Storage conditions: -20 - 70 °C, 0 - 95% relative humidity, non-condensing
USB Port: Used for data download and software upload. The controller records approximately 20,000 data points for each connected sensor.
Warranty: 2 years
Weight: 1.7 kg (controller only, w/o modules)